Using a sequence of MIPS instructions, create a new addressing mode that implements a load-word (lw) or storeword (sw) with auto-increment (by 4) of the address register after the memory access.

Using a sequence of MIPS instructions, create a "new addressing mode" that implements a load-word (lw) or store- word (sw) with auto-increment (by 4) of the address register after the memory access, where the syntax is lw Stl, imm16(St0)+and sw Stl, imm16(St0)+ Registers St1 and St0 are to be initialized to point to two distinct "arrays" of memory locations, where cach element in the array is one word (4 bytes). Thus, the "imm16" value should be the array element number (starting with 0) times 4. For example, if you wanted to access the 3rd element in the array (array[2]), the "imm16" value should be 8. You are to use the "la" (load address) MIPS pseudo-instruction; no other pseudo-instructions may be used. Below is an example "code snippet" of how to initialize Stl and $t0 to point the data, along with appropriate data definitions: 1, num 1 $to, arrayl # initialize $t1 to point to memory location with label "num !" # initialize $t0 to point to memory location with label "array2" la # MIPS code that actually implements the "enhanced" MIPS ns truction specified ori vo, Szero, 10 syscaL1 # $v0