Using a table similar to that shown in Figure 3.10 calculate decimal unsigned 6-bit integer 6010 (Dividend - 1111002) divided by 910 (Divisor - 0010012) using the hardware shown in Figure 3.8. You should show the contents of each register on each step.

Multiplicand 32 bits 32-bit ALU Shift right Control Product Writetest 64 bits FIGURE 3.5 Refined version of the multiplication hardware. Compare with the first version in Figure 3.3. The Multiplicand register, ALU, and Multiplier register are all 32 bits wide, with only the Product register left at 64 bits. Now the product is shifted right. The separate Multiplier register also disappeared. The multiplier is placed instead in the right half of the Product register. These changes are highlighted in color. (The Product register should really be 65 bits to hold the carry out of the adder, but it's shown here as 64 bits to highlight the evolution from Figure 3.3.) Multiplicand 32 bits 32-bit ALU Shift right Control Product Writetest 64 bits FIGURE 3.5 Refined version of the multiplication hardware. Compare with the first version in Figure 3.3. The Multiplicand register, ALU, and Multiplier register are all 32 bits wide, with only the Product register left at 64 bits. Now the product is shifted right. The separate Multiplier register also disappeared. The multiplier is placed instead in the right half of the Product register. These changes are highlighted in color. (The Product register should really be 65 bits to hold the carry out of the adder, but it's shown here as 64 bits to highlight the evolution from Figure 3.3.)