Using the Marie Simulator, you will create a small assembly language Marie program. The program is a simple multiplication app $($MARIE does not have a MULT operator, so you have to figure out how to do this on your own$).$ Basically, your program will issue a prompt $(>),$ then accept a single digit integer from the user. $($Hit the ENTER key to actually enter the value$).$ It will then echo that integer to the screen, print a $*$ symbol, then wait for a second digit. It will then echo this digit to the screen, followed by the $=$ symbol and then the result of the multiplication. There is no error checking, so all numbers entered should be a single digit, and the result must also be a single digit. So $2*3=6$ or $8*1=8$ is okay, but $3*5=15$ is not $($i$.$e$.,$ your program is not expected to be able to handle the third case properly$).$ When the calculation is finished, you must tell the program whether to continue or not. If you enter a $!,$ the program will print $$BYE$$ to the screen and halt. If you simply hit the ENTER key instead, it will loop and provide a new prompt. Note that IO is quite limited on Marie so you can$$t do anything fancy. You should select the $$no linefeed$$ option in the Output Window $$ everything will be printed on one line. In addition, the data format of both the Input and Output registers should be set to ASCII $($this is the default$).$ It must not be changed to anything else as the program is running. A sample output for a two iteration loop would be something like this: $>3*3=9>1*4=4$BYE