What is the total cycle time for the following process line: 1. Slurry preparation comprises the mixing and glue of electrodes made from different materials, to enhance the potential energy of the battery. The capacity is the mixture is enough for 50 individual electrodes every 70 seconds. 2. Coating and Drying Procedure, where the electrodes assembled and glued, will be coated and have the glue dried through an infrared process. The process takes 45 seconds to finish 10 pairs of electrodes 3. Compressing procedure that will reduce the thickness of electrodes. The process takes 25 seconds to finish 10 pairs of electrodes. 4. Electrode Shaping - comprises three parallel equipment that performs the electrode shaping through (1) punching, (2) laser-cutting and, (3) water cutting. a. (1) processes 10 pairs of electrodes each 15 seconds b. (2) processes 15 pairs of electrodes in 40 seconds c. (3) processes 10 pairs of electrodes in 75 seconds 5. Electrolytic Cell Assembly equipment where pairs of composite electrodes are stacked together. The capacity of this machine is 15 pairs of electrodes every 60 seconds 6. Enveloping puts a pair of electrodes inside a coated, resistant corrosion envelope that has the shape of a finished battery. The cycle time of this station is 40 seconds. 7. Electrode Filling The liquid that will conduct the current is inserted in the battery envelope. The cycle time of this process step is 60 seconds. The capacity is that 5 batteries can be processed simultaneously. 8. Testing thermal and load tests are performed in the batteries. Each test takes 90 seconds, and the equipment can test 5 batteries at the same time.