Open PowerWorld Simulator case, which models the Example 6.9 with transient stability data added for the generators. Determine the critical clearing time (to the nearest 0.01 second) for a fault on the line between buses 2 and 5 at the bus 5 end which is cleared by opening the line.

Data From Example 6.9:-

Data From Table 6.1 and 6.2 and 6.3:-

Figure 6.2 shows a single-line diagram of a five-bus power system. Input data are given in Tables 6.1, 6.2, and 6.3. As shown in Table 6.1, bus 1, to which a generator is connected, is the swing bus. Bus 3, to which a generator and a load are connected, is a voltage-controlled bus. Buses 2, 4, and 5 are load buses. Note that the loads at buses 2 and 3 are inductive since Q = -QL2 -2.8 and -QL3 = -0.4 are negative. = For each bus k, determine which of the variables Vk, Sk, Pk, and Qk are input data and which are unknowns. Also, compute the elements of the sec- ond row of Ybus