Question: Two loads are connected in parallel across an (880 mathrm{~V}(mathrm{rms})) line. The first load draws an average power of (20 mathrm{~kW}) at a lagging power

Two loads are connected in parallel across an $880 \mathrm{~V}(\mathrm{rms})$ line. The first load draws an average power of $20 \mathrm{~kW}$ at a lagging power factor of 0.87 . The second load draws $15 \mathrm{~kW}$ at a lagging power factor of 0.67 . Find the overall power factor of the circuit and the current drawn from the line.

Step by Step Solution

★★★★★

3.38 Rating (157 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Compute the complex power for each load S P jP 1 120 j113345 kVA 2 210 pf S2 ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Systems Analysis Design Questions!

Zhao Company has fixed costs of $265,200. Its single product sells for $159 per unit, and variable costs are $108 per unit. Compute the units that must be sold to achieve a target income of $102,000....

One norm for remote communication is to establish a daily routine of when you are available to work and creating a distraction-free environment. These are crucial for what?

How should "Building" be reported on a Classified Balance Sheet? Property, Plant and Equipment. Current Assets. Owner's Equity. Not reported on the Balance Sheet.

Two loads are connected in parallel across an 880 V(rms) line. The first load draws an average power of 20 kW at a lagging power factor of 0.8. The second load draws 16kWat a lagging power factor of...

Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a series impedance of $(0.4+j 2.7) \Omega$ per phase. One of the loads absorbs \(560...

Two balanced three-phase loads are connected in parallel. The first load absorbs $25 \mathrm{~kW}$ at a lagging power factor of 0.9. The second load absorbs an apparent power of $30 \mathrm{kVA}$...

In Figure P16-20, the voltage across the two loads is $\mid V_{\mathrm{L}}$ I $=4.8 \mathrm{kV}$ (rms). The load $Z_{1}$ draws an average power of $15 \mathrm{~kW}$ at a lagging power factor...

The following system has two loads. The first load Z draws an apparent power of 30 kVA with a power factor of 0.9 lagging. The second load draws 40 kW of power with a power factor of 0.795 lagging....

Two three - phase wye - connected loads are in parallel across a three - phase supply. The first load draws a phase current of 1 0 A at 0 . 9 5 power factor leading, and the second load draws a phase...

1658 Two balanced three-phase loads are connected in parallel. The first load absorbs 25 kW at a lagging power factor of 0:9. The second load absorbs an apparent power of 30 kVA at a leading power...

Frank Fletch manages a plant that produces a variety of ball bearings and cylindrical roller bearings. Seeking to better understand his cost structure, Frank collected the following data regarding...

How can balanced scorecard measures be used for conversion process planning?

Average investors who offer and sell the securities they own, yet avoid the need to have the issue register the securities , are known as

=3. In Excels sensitivity report, what is the interpretation of the Objective Coefficient column? The Allowable Increase column? The Allowable Decrease column?

Find the phasor gain KVO/VS and input impedance ZIN of the circuit in Figure P870. ZIN 10 w -15 -25 + 1 Vs 33 FIGURE P8-70 Vo

The dependent source circuit in Figure P869 is operating in the sinusoidal steady state with v1 krad/s and m103. Find the phasor gain KVO/VS and the input impedance ZIN seen by VS. Validate your...

Find the phasor input VS in Figure P868 when the phasor output is VO300 j200 V. Vs 10 ww 20 m + | 100 2200 2 Vo FIGURE P8-68

In capital budgeting analysis, using accelerated depreciation (as opposed to straight-line depreciation) results in Select one: a. Higher net cash flows in the early years of the project. b. Lower...

NumPyA 5 - FOR CREDIT Create a . ipynb file called NumPyA 5 credit.ipynb and complete the following. For this assignment load but DO NOT INSTALL NumPy: run the following at the top of your script and...

Carlberg Company has two manufacturing departments, Assembly and Painting. The Assembly department started 12,300 units during November. The following production activity in both units and costs...