Question: The fin shown in Figure P3-56 has a base maintained at 300ºC and is exposed to the convection environment indicated. Calculate the steady-state temperatures of

The fin shown in Figure P3-56 has a base maintained at 300ºC and is exposed to the convection environment indicated. Calculate the steady-state temperatures of the nodes shown and the heat loss if k = 1.0 W/m· ºC.

Figure P3-56 -40 Win','C = 20C 1.0 cm 1.0 cm cm

Step by Step Solution

★★★★★

3.47 Rating (167 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

The Equation... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

892-P-T-H-T (797).docx

120 KBs Word File

Students Have Also Explored These Related Thermodynamics Questions!

The fin shown in Figure P13-5 is insulated on the perimeter. The left end has a constant temperature of 100 oC. A positive heat flux of q* = 500 W/m2 acts on the right end. Let Kxx = 6 W/(m ( oC) and...

The tapered aluminum pin fin shown in Figure P3-72 is circular in cross section with a base diameter of 1 cm and a tip diameter of 0.5 cm. The base is maintained at 200C and loses heat by convection...

The rectangle shown in Figure P3.57 has sides parallel to the x and y axes. The position vectors of two corners are A = 10.0 m at 50.0° and B = 12.0 m at 30.0°. (a) Find the perimeter of the...

P 2 . 1 . The fin shown in below figure has a base maintained at 3 0 0 - C and is exposed to the convection environment indicated. If k = 1 . 0 W / mK , write the energy balance equations and...

Circumferential fins of rectangular profile are constructed of aluminum and attached to a copper tube having a diameter of 25 mm and maintained at 100C. The length of the fins is 2 cm and thickness...

Let's consider the example of a composite fin shown in Figure P8.9. A carbon steel fin of circular cross-section is coated with a thin dielectric layer for corrosion protection. The dielectric layer...

Consider the composite pin fin shown in Figure P8.7. Half of the fin is formed of a material with thermal conductivity $k_{1}$, and the other half is formed of material with thermal conductivity...

Consider the fin of section 9.2.1 and its solution given by equation (9.21). a. Develop expressions for the effectiveness and efficiency of such a fin. b. Estimate the effectiveness for the following...

Determine the steadystate temperature distribution in a thin rectangular fin shown in figure 4.18. The fin is $120 \mathrm{~mm}$ long, $160 \mathrm{~mm}$ wide, and $1.25 \mathrm{~mm}$ thick....

As a group: Review Figure 3 that shows the cash flows estimated before and after Katrina. Calculate the NPV of cash flows for each stream of cash before and after Katrina using a discount rate of 9%....

What is meant by the steady-state economic growth path? What determines its slope?

Compute the surface integral over the given oriented surface: = (0,6, x ) , hemisphere x? + y +z? = 81, z20, outward-pointing normal %3D

What was the result of high - frequency traders' leaving the market during the fash crash of 2 0 1 0 ? Minple Choice Malet loquidiy decreased. Market liaquidiy increased. Trading frequency inoteased.

H. If you find yourself in a meeting mismatch (the meeting is the wrong size for the goals), what should you do? a) Wait to see if anyone else complains; b) suggest to the meeting organizer that...

Suppose that waste heat from a refinery is available for a chemical plant located 1.6 km away. The waste stream from the refinery consists of 1 standard cubic meter per second of corrosive gas at...

The heat transfer coefficient between a surface and a liquid is 57 W/ (m 2 K). How many watts per square meter will be transferred in this system if the temperature difference is 10C?

An inventor wants to increase the efficiency of wood-burning stoves by reducing the energy lost through the exhaust stack. He proposes to accomplish this by attaching fins to the outer surface of the...

Problem 9-17 WACC Estimation The table below gives the balance sheet for Travellers Inn Inc. (TII), a company that was formed by merging a number of regional motel chains. Travellers Inn: December...

Howell Petroleum, Inc., is trying to evaluate a generation project with the following cash flows:

K-Too Everwear Corporation can manufacture mountain climbing shoes for $25.95 per pair in variable raw material costs and $17.20 per pair in variable labor expense. The shoes sell for $156 per pair....