# The hub diameter and projection for the gear of Prob. 1351 are 100 and 37.5 mm, respectively.

## Question:

The hub diameter and projection for the gear of Prob. 13€“51 are 100 and 37.5 mm, respectively. The face width of the gear is 50 mm. Locate bearings C and D on opposite sides, spacing C 10 mm from the gear on the hidden face (see figure) and D 10 mm from the hub face. Find the output torque and the magnitudes and directions of the forces exerted by the bearings on the gearshaft.
Prob. 13€“51, The figure shows a double-reduction helical gearset. Pinion 2 is the driver, and it receives a torque of 1200 lbf ãƒ»in from its shaft in the direction shown. Pinion 2 has a normal diametral pitch of 8 teeth/in, 14 teeth, and a normal pressure angle of 20—¦ and is cut right-handed with a helix angle of 30—¦. The mating gear 3 on shaft b has 36 teeth. Gear 4, which is the driver for the second pair of gears in the train, has a normal diametral pitch of 5 teeth/in, 15 teeth, and a normal pressure angle of 20—¦ and is cut left-handed with a helix angle of 15—¦. Mating gear 5 has 45 teeth. Find the magnitude and direction of the force exerted by the bearings C and D on shaft b if bearing C can take only radial load while bearing D is mounted to take both radial and thrustload.
Fantastic news! We've Found the answer you've been seeking!