Question: The traverse in Problems 10.9 through 10.11 was performed in the Pennsylvania North Zone of SPCS83. The average elevation for the area was 505.87 m

The traverse in Problems 10.9 through 10.11 was performed in the Pennsylvania North Zone of SPCS83. The average elevation for the area was 505.87 m and the average geoidal separation was −28.25 m. using the data in Table 20.1 and a mean radius for the earth, reduce the observations to grid and adjust the traverse. Compare this solution with that obtained in Chapter 10. (Use 6,371,000 m for an average radius of the earth.)

Step by Step Solution

★★★★★

3.47 Rating (170 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Using the initial coordinates in meters from Chapter 10 the scale factor at each station is from Wol... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

707-P-M-K (788).docx

120 KBs Word File

Students Have Also Explored These Related Mechanics Questions!

The traverse in Problems 10.12 through 10.14 was performed in the New Jersey zone of SPCS83. The average elevation for the area was 234.93 m and the average geoidal separation was 32.86 m. using the...

The azimuth from station A of a link traverse to an azimuth mark is 212o12'36''. The azimuth from the last station of the traverse to an azimuth mark is 192o12'15''. Angles to the right are observed...

Determine the area within the traverse of Problem 10.11 using DMDs.

The traverse in Problem 10.21 was performed in the Pennsylvania North Zone of SPCS83. The average elevation for the area was 367.89 m and the average geoidal separation was 30.23 m. using the mean...

Problem 6 ( 1 0 . 1 1 ) : Using the compass ( Bowilitch ) rule adjust the departures and latitudes of the traverse in Problem 1 0 . 1 0 . If the coordinates of station A are x = 3 1 0 , 6 3 0 . 8 9 2...

1 0 . 1 0 Using the compass ( Bowditch ) rule adjust the departures and latitudes of the traverse in Problem 1 0 . 9 . If the coordinates of station A are x = 3 1 0 , 6 3 0 . 8 9 2 m and Y = 1 2 1 ,...

Determine departures and latitudes, linear misclosure, and relative precision for the traverse of Problem 10.9 if lengths of the sides (in meters) are as follows: AB = 223.011; BC = 168.818; CD =...

3-19. Ostwald Ripening In a supersaturated solid solution, precipitation may lead to the formation of grains or particles of a new phase. It is found that, after an initial stage of this process that...

Would BSI be liable under the ADEA if it terminated Marcus? Why or why not? Explain what Marcus would need to prove and how BSI might respond to his complaint with a defense to liability. What should...

108. Suppose a firm has a total market value of $900 and outstanding debt with a face value of $850. The risk- free rate of interest is 6%. If the fimm will have a value of either $650 or $900 next...

Given that the linear transformation T: C3 C3, is injective, show directly that {T (e1), T (e2), T (e3)} is a linearly independent set. 2xy T 22

A hydrometer is used to measure the specific gravity of liquids. For a certain liquid a hydrometer reading indicates a specific gravity of 1.15. What is the liquids density and specific weight?...

Bata Shoe-City Ltd. Produces 24,000 pairs of running shoes per month. Annual fixed costs are Sh. 840,000 and the contribution from each pair is 60% of their Sh. 20 per-unit selling price. Required:...

Which of the following is an input to the Control Resources process? a) Risk register b) Project charter c) Resource management plan d) Stakeholder register

The rigid L-shaped member ABC is supported by a ball-and-socket joint at A and by three cables. If a 1.8-kN load is applied at F, determine the tension in each cable. 420 mm 420 mm 240 mm 210 mm 320...

Solve Problem 4.123, assuming that the 1.8- kN load is applied at C. PROBLEM 4.123 The rigid L-shaped member ABC is supported by a ball-and socket joint at A and by three cables. If a 1.8- kN load is...

Three rods are welded together to form a "corner" that is supported by three eyebolts. Neglecting friction, determine the reactions at A, B, and C when P = 240 lb, a =12 in., b = 8 in., and c =10 in....

2. Calculate the future value of a savings account of $10,000 for 6 years at 9.25% compound interest. 4. When Brook was born, his parents put down a deposit for him in an investment account earning...

Current yield, capital gains yield, and yield to maturity Hooper Printing Inc. has bonds outstanding with 9 years left to maturity. The bonds have an 9% annual coupon rate and were issued 1 year ago...

PLS HURRY An investment project has annual cash inflows of $7,000,$6,700,$7,500, and $8,800, and a discount rate of 14%. What is the discounted payback period for these cash flows if the initial cost...