Question: Estimate the die clamping force required for injection molding 10 identical 1.5-in.-diameter disks in one die. Include the runners of appropriate length and diameter?

Estimate the die clamping force required for injection molding 10 identical 1.5-in.-diameter disks in one die. Include the runners of appropriate length and diameter?

Step by Step Solution

★★★★★

3.33 Rating (174 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Assume that central sprues with runners are being used ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

972-E-M-E-B-D (949).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

If the required clamping force at the board A is to be P, determine the torque M that must be applied to the handle of the C clamp to tighten it down. The single square-threaded screw has a mean...

If the required clamping force at the board A is to be F, determine the torque M that must be applied to the handle of the hold-down clamp to tighten it down. The single square-threaded screw has a...

If a clamping force of 300 N is required at A, determine the amount of force F that must be applied to the handle of the toggleclamp. 70 mm -235 mm- 30 mm 275 mm 130 30 rhm

Homework Set 1 17.33: Estimate the maximum tonnage required to compact a brass slug 3.0 inches in diameter. Would the height of the slug make any difference in your answer? Explain your reasoning....

1. Referring to the data in Exhibit 5, is the process capable of meeting GME's internal wire-bond strength requirement of at least seven grams? Use Cpk in explaining your answer. 2. Referring to the...

A photograph of a " C Clamp" used to clamp parts together for gluing and other applications is shown on the attached page. The photograph is actual size, so you can measure dimensions directly off of...

For the C clamp shown, a force is applied at the end of the 0 . 3 7 5 in diameter handle. The screw is a 0 . 7 5 in - 6 Acme thread ( from Figure 8 - 3 ) , and is 1 0 . 0 0 in long overall, with a...

Problem 1 : The inspection records of a hose assembly operation indicated a high rate of rejection. A Pareto Analysis of the records showed that leaks were a major cause ( 8 0 % ) of the problem. A...

Please show all steps for understanding! Thanks in advance :) 9. A robotic clamp is lowered around a plastic box before the clamp closes and apply a clamping force around the box. The clamp then...

Please show all steps for understanding! Thank you. Note: Worded explanation helps a lot 9. A robotic clamp is lowered around a plastic box before the clamp closes and apply a clamping force around...

The variance of a population is a. Express S2 as a function h of population totals And b. Find an estimator Å 2 by substituting estimators for t1, t2, and t3. c. Find the linearization variance...

How does the principle of locality relate to the use of multiple memory levels?

You have worked as a financial specialist for Little Town Bank and Loan for the past eight years. Little Town B&L has a stellar reputation in the community. Part of this is due to the high level of...

3. a. Wireless and cable Internet access services are substitutes, so a reduction in the price of wireless Internet access services causes a decrease in the demand for cable-based Internet access...

A tornado rips off a 100 m2 roof with a mass of 1000 kg. What is the minimum vacuum pressure needed to do that if we neglect the anchoring forces?

The hydraulic lift in an auto-repair shop has a cylinder diameter of 0.2 m. To what pressure should the hydraulic fluid be pumped to lift 40 kg of piston/arms and 700 kg of a car?

A 2.5 m tall steel cylinder has a cross sectional area of 1.5 m2. At the bottom with a height of 0.5 m is liquid water on top of which is a 1 m high layer of gasoline. The gasoline surface is exposed...

a . Lands End recently implemented a strategy of filling nearly all orders when the order is placed. In what year do you believe the company implemented this strategy and how is the strategy...

When a parent company uses the equity method to account for investments, the controlling interest in consolidated net income includes all of the following except The parent's income from its own...

Ferro Co. has outstanding 10-year noncallable bonds with a face value of $1,000. These bonds have a current market price of $1,278.41, a coupon rate of 11%, and annual coupon payments. The company...