Question: Design a MOD-100, BCD counter using either two 74HC160 or two 74HC162 chips and any necessary gates. The IC counter chips are to be synchronously

Design a MOD-100, BCD counter using either two 74HC160 or two 74HC162 chips and any necessary gates. The IC counter chips are to be synchronously cascaded together to produce the BCD count sequence for 0 to 99. The MOD-100 is to have two control inputs, an active-HIGH count enable (EN) and an active-HIGH, synchronous load (LD). Label the counter outputs Q0, Q1, Q2, and so on, with Q0 = LSB. Which set of outputs represents the 10s digit?

Step by Step Solution

★★★★★

3.47 Rating (170 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

To design a MOD100 BCD counter using two 74HC160 or 74HC162 chips and any necessary gates we can fol... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Digital Systems Principles And Application Questions!

Design a MOD-100, binary counter using either two 74HC161 or two 74HC163 chips and any necessary gates. The IC counter chips are to be synchronously cascaded together to produce the binary count...

Managing Scope Changes Case Study Scope changes on a project can occur regardless of how well the project is planned or executed. Scope changes can be the result of something that was omitted during...

Planning is one of the most important management functions in any business. A front office managers first step in planning should involve determine the departments goals. Planning also includes...

m BD 1/24 PROJECT MUSE Indigenous Circuits: Navajo Women and the Racialization of Early Electronic Manufacture Lisa Nakamura American Quarterly, Volume 66, Number 4, December 2014, pp. 919-941...

Display both circuit diagram (1) and 4-bit BCD counter (2). 1. A shift register, as shown below, is a cascade of flip flops, sharing the same clock, in which the output of each flip-flop is connected...

Question 1 : Custom Reset Condition "I want to design a two - digit BCD counter that resets to 2 5 after reaching 4 9 instead of rolling over to 0 0 . How should I modify the circuit using AND gates...

1. A shift register, as shown below, is a cascade of flip flops, sharing the same clock, in which the output of each flip-flop is connected to the 'data' input of the next flip-flop in the chain,...

Write down the counting sequence of a BCD counter. Based on this sequence, design a synchronous BCD counter using only T type flip flops. You can use other gates if necessary, for your design....

digital logic design 3. Design a synchronous BCD Counter based on the following conditions. If last digit of your Roll No is EVEN, then Design an UP counter with JK-Flip Flops by initializing the...

roll no 581 Design a synchronous BCD Counter based on the following conditions. If last digit of your Roll No is EVEN, then Design an UP counter with JK-Flip Flops by initializing the counter with...

(a) Write down the explicit formulae for the Cauchy-Schwarz and triangle inequalities based on the weighted inner product. (b) Verify that the inequalities hold when fix) = 1, g(x) = ex by direct...

What are each of the following observations an example of? Drag the appropriate items to their respective bins. Diffusion Submit Part C There is a gas leak in the kitchen and you smell gas in the...

Question 6 2 pts There are several categories of individuals with whom a competent salesperson must work in order to make a sale. Those individuals who provide information, directly or indirectly,...

1. Forecasts: (a) Are more accurate for individual items than for groups of items (b) Become more accurate with longer time horizons (c) Are rarely perfect (d) All of the above

A toaster is rated at 600 W when connected to a 120-V source. What current does the toaster carry, and what is its resistance?

A Van de Graaff generator (see Figure 25.29) is operating so that the potential difference between the high-voltage electrode B and the charging needles at A is 15.0 kV. Calculate the power required...

In a hydroelectric installation, a turbine delivers 1 500 hp to a generator, which in turn transfers 80.0% of the mechanical energy out by electrical transmission? Under these conditions, what...

"Organisation should strive to Develop a positive organisational culture". SO, what are the points to create positive organisational culture. Please explain briefly and expand more about it.

Problem: How can apple ensure ethical practices with their partner manufacturers? 1.. What are the best practices in industry/other similar organizations in regards to the problem? 2. Why should...

What is the relationship between a firm's customers and its business-level strategy in terms of who , what , and how and s hy is this relationship important?