Question: 3 routing table question(Create a topology while reading the routing table) RouterAlien#sh ip route Codes: L - local, C - connected, S - static, R

3 routing table question(Create a topology while reading the routing table)

RouterAlien#sh ip route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

R 192.168.10.0/24 [120/4] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.20.0/24 [120/4] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.30.0/24 [120/3] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.40.0/24 [120/3] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.50.0/24 [120/2] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.60.0/24 [120/2] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.70.0/24 [120/1] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.80.0/24 [120/1] via 192.168.100.1, 00:00:27, Serial0/0/1

R 192.168.90.0/24 [120/1] via 192.168.100.1, 00:00:27, Serial0/0/1

192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.100.0/24 is directly connected, Serial0/0/1

L 192.168.100.2/32 is directly connected, Serial0/0/1

192.168.110.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.110.0/24 is directly connected, GigabitEthernet0/0

L 192.168.110.1/32 is directly connected, GigabitEthernet0/0

192.168.120.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.120.0/24 is directly connected, GigabitEthernet0/1

L 192.168.120.1/32 is directly connected, GigabitEthernet0/1

RouterByrd#sh ip route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.10.0/24 is directly connected, GigabitEthernet0/0/0

L 192.168.10.1/32 is directly connected, GigabitEthernet0/0/0

192.168.20.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.20.0/24 is directly connected, GigabitEthernet0/0/1

L 192.168.20.1/32 is directly connected, GigabitEthernet0/0/1

192.168.30.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.30.0/24 is directly connected, Serial0/1/0

L 192.168.30.1/32 is directly connected, Serial0/1/0

R 192.168.40.0/24 [120/1] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.50.0/24 [120/1] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.60.0/24 [120/2] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.70.0/24 [120/2] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.80.0/24 [120/3] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.90.0/24 [120/3] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.100.0/24 [120/3] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.110.0/24 [120/4] via 192.168.30.2, 00:00:05, Serial0/1/0

R 192.168.120.0/24 [120/4] via 192.168.30.2, 00:00:05, Serial0/1/0

RouterAntartica#sh ip route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

R 192.168.10.0/24 [120/3] via 192.168.70.1, 00:00:08, Serial0/0/0

R 192.168.20.0/24 [120/3] via 192.168.70.1, 00:00:08, Serial0/0/0

R 192.168.30.0/24 [120/2] via 192.168.70.1, 00:00:08, Serial0/0/0

R 192.168.40.0/24 [120/2] via 192.168.70.1, 00:00:08, Serial0/0/0

R 192.168.50.0/24 [120/1] via 192.168.70.1, 00:00:08, Serial0/0/0

R 192.168.60.0/24 [120/1] via 192.168.70.1, 00:00:08, Serial0/0/0

192.168.70.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.70.0/24 is directly connected, Serial0/0/0

L 192.168.70.2/32 is directly connected, Serial0/0/0

192.168.80.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.80.0/24 is directly connected, GigabitEthernet0/0

L 192.168.80.1/32 is directly connected, GigabitEthernet0/0

192.168.90.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.90.0/24 is directly connected, GigabitEthernet0/1

L 192.168.90.1/32 is directly connected, GigabitEthernet0/1

192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.100.0/24 is directly connected, Serial0/0/1

L 192.168.100.1/32 is directly connected, Serial0/0/1

R 192.168.110.0/24 [120/1] via 192.168.100.2, 00:00:08, Serial0/0/1

R 192.168.120.0/24 [120/1] via 192.168.100.2, 00:00:08, Serial0/0/1

Step by Step Solution

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock blur-text-image

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Databases Questions!

INSTRUCTION: Construct 2 routers with 1PC each, then screenshot the Ping Command Status, proving that there is a connectivity. Use the following codes in this experiment: EXAMPLE COMMANDS/GUIDE: CLI...

Download Cisco Packet Tracker from the list of tools and install it either in your computer or in a Windows virtual machine.Section A: RIPOpen the provided Cisco lab file 5 . 6 . 1 . 2 a . pka about...

Cisco Networking Academy Mind Wide Open Lab 1.5.2: Basic Router Configuration Topology Diagram 192.168.1.0/24 192.168.2.0/24 192.168.3.0/24 PC1 Fa0/0 S0/0/0 DCE S0/0/0 Fa0/0 PC2 ----- R1 R2...

The solution is required On Cisco Packet Trace r Thank you :) Today's Lab: In this lab, we will learn how to configure Static Routing on the Routers 192.168.10.1 192.168.10.2 192.168.1.1 1941...

Lab - Configuration and OSPF Topology G 0 / 0 / 1 G 0 / 0 / 0 R 2 1 0 . 1 . 1 . 0 / 3 0 . 2 . 2 G 0 / 0 / 0 . 1 R 1 G 0 / 0 / 1 . 1 S 1 FO / 6 FO / 5 PC - A 1 9 2 . 1 6 8 . 1 . 0 / 2 4 Addressing...

What is the solution for this lab with the network application on the cisco packet trcer program LAB 7: Configuration and analysis of dynamic Routing Protocols Part A: Configuration and analysis of...

Overview and Objectives This case study allows students fully Design a complex network using skills gained throughout the course but build and configure only a prototype as seen in the following...

Analyze a routing table to determine the route source, administrative distance, and metric for a given route to include IPv4/IPv6. 1 How many different IPv8 networs are shown on the routng table...

How does routing work? Routers refer to internal routing tables to make decisions about how to route packets along network paths. A routing table records the paths that packets should take to reach...

The first-year operation of ABC Company is 2016. Below is B/S and I/S of ABC Company for 2016. As an analyst, you think that Allowance for Uncollectible Accounts seems understated. You think the...

The heats of vaporization of liquid Cl2, liquid H2, and liquid N2 are 20.4 kJ/mol, 0.9 kJ/mol, and 5.6 kJ/mol, respectively. Are the relative values as you would expect? Explain.

Mark true or false. We need to write implements in order to give bounded types while writing a generic class. Ex: is a correct syntax. True False

Which of the following are problems with identifying users of ABC? Multiple select question. ABC means different things to different organizations. Organizations will announce the discontinuance of...

What advice could you give to a friend who confides in you that he or she has difficulty concentrating in a class taught by a faculty member for whom English is not a first language? (Objective 3)

Hold an in-class debate on one or more of the following statements. (Objective 5) a. It is not necessary to be a team player to succeed in the business world. b. Teams hide a members individual...

Identify two advantages and two disadvantages of teams. (Objective 5)