Based on the sampling done, the control limits for 3-sigma x chart are: Upper Control Limit (UCL ) = inches (round your response to four decimal places). Lower Control Limit (LCLz) - inches (round your response to four decimal places). Based on the x-chart, is one or more samples beyond the control limits? For the given data, the Rinches (round your response to four decimal places). The control limits for the 3-sigma R-chart are: Upper Control Limit (UCLR) - inches (round your response to four decimal places). Lower Control Limit (LCLR) - inches (round your response to four decimal places). Based on the R-chart, is one or more samples beyond the control limits? Refer to Table 56.1. Factors for Computing Control Chart Limitsigma) for this problem. Twelve samples, each containing five parts, were taken from a process that produces steel rods at Emmanuel Koders factory. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The results were Sample Sample Mean Range fin.) (in.) 1 11.600 0.033 2 11.000 0041 3 11 593 0.034 4 51.606 0.051 5 11.500 0.031 11.599 0.036 Sample Sample Mean (in.) Range lin) 7 11 000 0.041 8 11 500 0.034 9 11.593 0.027 10 11.601 0.029 11 11.603 0.099 12 15.504 0047 For the given data, the x - inches (round your response to four decimal places). Based on the sampling done, the controlimits for 3-Sigmax chartare