create a Addressing Table Device Interface IP Address / Prefix Default Gateway R1 G0/0 IP Address /Prefix
Fantastic news! We've Found the answer you've been seeking!
Question:
create a Addressing Table
Device | Interface | IP Address / Prefix | Default Gateway |
---|---|---|---|
R1 | G0/0 | IP Address /Prefix | N/A |
R1 | G0/0 | 2001:db8:acad::1/64 | N/A |
R1 | G0/0 | fe80::1 | N/A |
R1 | G0/1 | IP Address /Prefix | N/A |
R1 | G0/1 | 2001:db8:acad:1::1/64 | N/A |
R1 | G0/1 | fe80::1 | N/A |
R1 | G0/2 | IP Address /Prefix | N/A |
R1 | G0/2 | 2001:db8:acad:2::1/64 | N/A |
R1 | G0/2 | fe80::1 | N/A |
R1 | S0/0/1 | 172.16.1.2 /30 | N/A |
R1 | S0/0/1 | 2001:db8:2::1/64 | N/A |
R1 | S0/0/1 | fe80::1 | N/A |
Central | S0/0/0 | 209.165.200.226 /30 | N/A |
Central | S0/0/0 | 2001:db8:1::1/64 | N/A |
Central | S0/0/0 | fe80::2 | N/A |
Central | S0/0/1 | 172.16.1.1 /30 | N/A |
Central | S0/0/1 | 2001:db8:2::2/64 | N/A |
Central | S0/0/1 | fe80::2 | N/A |
S1 | VLAN 1 | IP Address /Prefix | IP Address |
S2 | VLAN 1 | IP Address /Prefix | IP Address |
S3 | VLAN 1 | IP Address /Prefix | IP Address |
Staff | NIC | IP Address /Prefix | IP Address |
Staff | NIC | 2001:db8:acad::2/64 | fe80::1 |
Staff | NIC | fe80::2 | fe80::1 |
Sales | NIC | IP Address /Prefix | IP Address |
Sales | NIC | 2001:db8:acad:1::2/64 | fe80::1 |
Sales | NIC | fe80::2 | fe80::1 |
IT | NIC | IP Address /Prefix | IP Address |
IT | NIC | 2001:db8:acad:2::2/64 | fe80::1 |
IT | NIC | fe80::2 | fe80::1 |
Web | NIC | 64.100.0.3 /29 | 64.100.0.1 |
Web | NIC | 2001:db8:cafe::3/64 | fe80::1 |
Web | NIC | fe80::2 | Fe80::1 |
The router Central, ISP cluster, and the Web server are completely configured. You must create a new IPv4 addressing scheme that will accommodate 4 subnets using the 192.168.23.0/24 network. The IT department requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff requires 100 hosts. A Guest subnet will be added in the future to accommodate 25 hosts. You must also finish the basic security settings and interface configurations on R1. Then, you will configure the SVI interface and basic security settings on switches S1, S2, and S3.
- Instructions
IPv4 Addressing
- Use 192.168.23.0/24 to create subnets that meet the host requirements. (VLSM)
- Staff: 100 hosts
- Sales: 50 hosts
- IT: 25 hosts
- Guest network to be added later: 25 hosts
Related Book For
Posted Date: