EXPERIMENT $1$: VIBRATION ANALYSIS

$1.$INTRODUCTION $(10$ MARKS$)$

GIVE A DETAILED EXPLANATION ABOUT VIBRATION ANALYSIS

$2.$APPARATUS $($VIBRATION TEST RIG, PHANTOM VIBRATION SENSOR, LENOVA INFINITY$)$

DESCRIBE EACH APPARATUS AND WHAT WAS ITS USE IN EXPERIMENT

$3.$EXPECTATION

EXPLAIN WHAT KIND OF RESULTS ONE SHOULD BE EXPECTING

$4.$PROCEDURE $($DO NOT COPY AND PASTE FROM THE BELLOW$)$

Switch on the test rig's electric motor from the power supply and let it run for $1$ minute. This is to allow the machine to reach the desired working conditions.

Ensure that the transducer is properly connected to the Leonona infinity.

Mount the magnetic end of the transducer on the measuring point of the bearings and motor.

Save the results obtained from the Leonova infinity

Pair the sensor with gateway $2\mathrm{.}0.$ Also, El analytics should be configured to allow the transfer of vibration data.

Place the Phantom $($Sensors$)$ at desired points on the test rig.

Run the test rig for a time interval of $10$ minutes and download the FFT spectrum reading.

Use the machine fault diagnosis chart and FFT spectrum reading to diagnose the fault by reading the patterns and indicators.

$5.$CONCLUSIONS

Provide a conclusion for work that was done in this experiment, explain how this experiment can be improved to get better understanding of the topic, and finally mention what was learned from this experiment.

$6.$REFERENCES

USE HARVAD STYLE OF REFERENCING