Question: message from R 7 R 7 # show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M

message from R7"R7# show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1- OSPF NSSA external type 1, N2- OSPF NSSA external type 2
E1- OSPF external type 1, E2- OSPF external type 2, E - EGP
i - IS-IS, L1- IS-IS level-1, L2- IS-IS level-2, ia - IS-IS inter area
*- candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
C 20.0.0.0/8 is directly connected, Serial2/0
C 30.0.0.0/8 is directly connected, FastEthernet0/0
C 40.0.0.0/8 is directly connected, Serial3/0
C 60.0.0.0/8 is directly connected, Serial6/0
S*0.0.0.0/0 is directly connected, Serial3/0
is directly connected, Serial2/0
is directly connected, Serial6/0" Refer to the diagram and the message copied from the CLI of R
7
.
Assume the routers use fast switching
for load balancing. All other routers except R
7
set with a default route via R
7
.
Will the PC be able to
communicate without any issues? Explain why

Step by Step Solution

There are 3 Steps involved in it

1 Expert Approved Answer
Step: 1 Unlock blur-text-image
Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock
Step: 3 Unlock

Students Have Also Explored These Related Programming Questions!