Pla anyone shows me the matlab command to solve question no.1

Chemical engineers use both English and SI units on a regular basis. For example, the rate of energy input to a steam power plant from burning fossil fuels is usually measured in Btu/hour. The high-power pumps, by contrast, are often rated in horsepower or in ft lbf/s. Here are some conversion factors relating these different power measurements: 1kW = 3412.14 Btu/h = 737.56 ftlb_f/s 1kp = 550 ftlb_f/s = 2544.5 Btu/h Generate a table that includes conversions from kW to Btu/h, hp, and ft lbf/s. Let the user define the initial value of kW, the final value of kW, and the number of entries in the table. Use disp and fprintf to create a table with a title, column headings, and appropriate spacing. The following data was obtained during a catalytic reaction experiments to yield a propane product percentage at FKKSA laboratory; However, these general criteria need to be considered: The temperature should remain between 200 degree C and 300 degree C. The pressure should remain between 100 and 400 kPa. The catalyst loading should remain between 10 and 35 g