please solve all completely

Refer to Table S6 1 - Factors for Computing Control Chart Limits (3 sigma) for this problem Twelve samples, each containing five parts, were taken from a process that produces steel rods at Emmanual Kodzi's factory The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed The results were Sample 1 2 3 4 5 Sample Mean Range (in.) (in.) 11 102 0.033 11.104 0.041 11.089 0.034 11 106 0.051 11.099 0.031 11.099 0.036 Sample Sample Mean (in.) Range (in.) 7 11.103 0.041 8 11 105 0.034 9 11.093 0.027 10 11 103 0.029 11 11.101 0.039 12 11 108 0.047 6 X For the given data, the x = inches (round your response to four decimal places) Based on the sampling done, the controllimits for 3-sigma x chart are Upper Control Limit (UCL) - inches (round your response to four decimal places). Lower Control Limit (LCL.;) = inches (round your response to four decimal places). Based on the x-chart, is one or more samples beyond the control limits? For the given data, the x = inches (round your response to four decimal places) Based on the sampling done, the control limits for 3-sigma x chart are: Upper Control Limit (UCL;) - inches (round your response to four decimal places) Lower Control Limit (LCLz) - inches (round your response to four decimal places) Based on the x-chart, is one or more samples beyond the control limits? For the given data, the R inches (round your response to four decimal p The control limits for the 3-sigma R-chart are Upper Control Limit (UCLR) - inches (round your response to four de Yes Lower Control Limit (LCLR) = inches (round your response to four dec No Based on the R-chart, is one or more samples beyond the control limits