Question 4 (25 points) You are asked to create a smart home system for collecting two sensor data from a thermometer and a hygrometer. Both sensor data should continuously show on a monitor. The data collecting frequency for the thermometer is about 1 second, and the frequency for the hygrometer is about 2 seconds. In addition, the data range for a thermometer is between 0 to 45 degrees, and the data range for a hygrometer is between 0 to 100%. Both sensors should run forever unless the user shuts down the system. You should implement this system according to the design below: Please check below for a sample output when the system is activated. You must follow the system design and have the same printing format in order to receive full marks. [ Thermometer]:5 degree [Hygrometer]:84\% [Thermometer]:9 degree [Thermometer]:21 degree [Hygrometer]:57\% [Thermometer]:15 degree [Thermometer]:14 degree [Hygrometer]:96\% [Thermometer]:29 degree [Thermometer]:6 degree [Hygrometer]:22\% [Thermometer]:0 degree