Question: Tasks: 1. Name the devices as indicated 2. Assign the IP addresses to the PCs as indicated 3.Create the virtual iterfaces in vlan 1 on

Tasks: 1. Name the devices as indicated 2. Assign the IP addresses to the PCs as indicated 3.Create the virtual iterfaces in vlan 1 on the swtiches and assign the IP addresses as indicated 4. Assign the IP addresses to R1 interfaces as indicated 5. Configure tenet access on S0 and S1 6. Make sure you are able to telnet access the S0 and S1 7. Submit the screenshot of your access of S0 or S1 from LaptopO 8. Submit PT file for Q1 and screen shot for Q2 Note: xx is 99
9.Submit the screenshot of your access of S1 or S2 from LaptopO
please by packet tracer and show with steps all questions how it's solve in packtracer . high rate
Create the PT files as shown in the picture below. Configure allthe tasks as indicated in the 'Tasks'. Submit the PT file Vlan 1 interface P address: 192.168.1.1xx Subnet mask: 255.255.255.0 Fa0/1 Fao PC-PT PCO 2960-2414Fa0/24 S1 IP address: 192.168.1.xx Subnet mask: 255.255.255.0 IP address: 192.168.1.10 Subnet mask: 255.255.255.0 Fa0/0 Fa0/24 Fa0/1 Fa1/0 Fa0 IP address 192.168.2.10 Subnet mask: 255.255.255.0 2960-24TT S2 Laptop-PT Laptopo Fa0/1 2811 R1 IP address: 192.168.0.10 Subnet mask 255.255.255.0 IP address:192.168.2.xox Subnet mask: 255.255.255.0 Fa0/24 P address: 192.168.0.xx Subnet mask: 255.255.255.0 Fao Fa0/1 23 PC-PT PC1 290 SO Vlan 1 interface P address: 192.168.0.1ox Subnet mask: 255.255.255.0
Step by Step Solution
There are 3 Steps involved in it
Get step-by-step solutions from verified subject matter experts
