Using the following: Part $1$: Router Configuration:

Step $1$: Configure Interface IP Addresses, Hostnames, and Access Passwords.

Interface IP Addresses:

$1.$ Enter global configuration mode:

configure terminal

Explanation

This command switches the router to the global configuration mode, where you can make changes to the router's configuration.

$2.$ Configure each interface with its IP address and subnet mask:

interface interface$\_$name ip address IP$\_$address subnet$\_$mask no shutdown

Example:

interface GigabitEthernet$0/0$ ip address $192\mathrm{.}168\mathrm{.}1\mathrm{.}1255\mathrm{.}255\mathrm{.}255\mathrm{.}0$ no shutdown

Explanation

interface interface$\_$name: Specifies the interface you want to configure $($e$.$g$.,$ GigabitEthernet$0/0).$

ip address IP$\_$address subnet$\_$mask: Sets the IP address and subnet mask for the selected interface.

no shutdown: Disables the interface.

Do the part $2$ for this assignment which is as follows:

Part $2$: Configuring CBAC Firewall

$-$ Configure CBAC using AutoSecure.

$-$ Test the CBAC configuration.

$-$ Validate the firewall functionality

Ensure the following criteria is met: All CBAC configurations

using AutoSecure are

achieved.

CBAC configuration is

tested successfully.

Firewall functionality is

completely and successfully

validated.

Strong evidence is provided

for all configurations and

tests