Load PowerWorld Simulator case Problem 12.30. This case models a slightly modified version of the 37 bus case from Example 6.13 with generator cost information, but also with two of the three lines between buses BLT69 and UIUC69 open. When the case is loaded the "Total Cost" field shows the economic dispatch solution, which results in an overload on the remaining line between buses BLT69 and UIUC69. Before solving the case, select LP OPF, OFP Buses to view the bus LMPs, noting that they are all identical. Then Select LP OPF, Primal LP to solve the case using the OPF, and again view the bus LMPs. Verify the LMP at the UIUC69 bus by manually changing the load at the bus by one MW, and then noting the change in the Total Cost field. Repeat for the DEMAR69 bus. Note, because of solution convergence tolerances the manually calculated results may not exactly match the OFP calculated bus LMPs.

Data From Example 6.13:-

Figure 6.6:-

To see a power-flow example of a larger system, open Power World Simula- tor case Example 6_13 (see Figure 6.6). This case models a 37-bus, 9-gener- ator power system containing three different voltage levels (345 kV, 138 kV, and 69 kV) with 57 transmission lines or transformers. The one-line can be panned by pressing the arrow keys, and it can be zoomed by pressing the