Question: Open PowerWorld Simulator case Problem 6_52. Open the (69 mathrm{kV}) line between buses REDBUD69 and PEACH69 (shown towards the bottom of the oneline). With the

Open PowerWorld Simulator case Problem 6_52. Open the $69 \mathrm{kV}$ line between buses REDBUD69 and PEACH69 (shown towards the bottom of the oneline). With the line open, determine the amount of Mvar (to the nearest 1 Mvar) needed from the REDBUD69 capacitor bank to correct the REDBUD69 voltage to at least 1.0 p.u.

Step by Step Solution

★★★★★

3.29 Rating (149 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock blur-text-image

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Systems Analysis Design Questions!

Open Power World Simulator case in this Problem, which includes a transient stability representation of the system from Example 1. Each generator is modeled using a two-axis machine model, an IEEE...

For the system from Problem 2.32, plot the real and reactive line losses as cap cap is varied between 0 and 10.0 Mvars. Problem 2.32 In PowerWorld Simulator case Problem 2_32 (see Figure 2.28) a 8...

Load PowerWorld Simulator case Problem 6_72. This case models a slightly modified, lossless version of the 37-bus case from Example 6.13 with generator cost information, but also with the transformer...

Open PowerWorld Simulator case Problem 6.52. Open the 69 kV line between buses HOMER69 and LAUF69 (shown towards the bottom-left). With the line open, determine the amount of Mvar (to the nearest 1...

Open PowerWorld Simulator case Problem 12.11, which includes a transient stability representation of the system from Example 6.13. Each generator is modeled using a two-axis machine model, an IEEE...

Repeat Problem 12.11 except first double the $\mathrm{H}$ value for each of the machines. This can be most easily accomplished by selecting Stability Case Info, Transient Stability Case Summary to...

Repeat Problem 14.18, except using PowerWorld Simulator case Problem 14_19 which has a different load level from the Problem 14.18 case. Problem 14.18 Usually in power flow studies the load is...

Open PowerWorld Simulator case Problem 12_11, which includes a transient stability representation of the system. Each generator is modeled using a two-axis machine model, an IEEE Type 1 exciter and a...

Open PowerWorld Simulator case Problem 14_15, which represents a lower load scenario for the Figure 14.22 case. Determine the optimal status of the six switched shunts to minimize the system losses....

Open PowerWorld Simulator case Problem 14_17 and note the case losses. Then close the bus tie breaker between buses 2 and 3. How do the losses change? How can the case be modified to reduce the...

On 1st January 2023, Puan Ainah discovered that her EPF accounts balances were RM480,585 (Account 1) and RM205,965 (Account 2). She has many plans for 2023 to utilize her EPF accounts for both...

Design a 4-bit adder-subtractor circuit using the 4-bit binaryFull adders (74LS83) and any necessary additional logic gates. Thecircuit has a mode input bit, M, that controls its...

What does a QQ - plot help assess in data analysis?

=1. Describe the role of Crystal Ball in performing computer simulations.

A shell and tube heat exchanger has two tube passes inside of a 29-in shell. The tubes are 1-in 16 BWG tubes on a 1-in square pitch and the heat exchanger contains the maximum amount of tubes...

A parallel flow double pipe heat exchanger is constructed using a -nom sch 5S stainless steel outer pipe and a -std type M copper tube. Ethanol enters the tube at 900 lbm/h and a temperature of 80F....

A counter flow double pipe heat exchanger has hot distilled water at 80C entering the annulus at a flow rate of 1 kg/s. Cold distilled water at 50C enters the inner tube at a flow rate of 0.9 kg/s....

Function FindMax(valuearray, namearray) as string Create the following function in VBA excel where it will find the maximum value in the array and then it will output that max value and name...

Blunderbluss Manufacturing's balance sheets report $180 million in total debt, $75 million in short-term investments, and $68 million in preferred stock has shares of common stock outstanding. A...

Clover Company purchased P3,000,000 of bonds at par. The entity has elected the fair value model for this investment. At year-end, the entity received annual interest of P120,000 and the fair value...