Question: The lower yield point for an iron that has an average grain diameter of 5 10-2 mm is 135 MPa (19,500 psi). At a

The lower yield point for an iron that has an average grain diameter of 5 × 10-2 mm is 135 MPa (19,500 psi). At a grain diameter of 8 × 10-3 mm, the yield point increases to 260 MPa (37,500 psi). At what grain diameter will the lower yield point be 205 MPa (30,000 psi)?

Step by Step Solution

★★★★★

3.25 Rating (169 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

The best way to solve this problem is to first establi... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

915-P-T-T-P (509).docx

120 KBs Word File

Students Have Also Explored These Related Thermodynamics Questions!

An undeformed specimen of some alloy has an average grain diameter of 0.040 mm. You are asked to reduce its average grain diameter to 0.010 mm. Is this possible? If so, explain the procedures you...

An under formed specimen of some alloy has an average grain diameter of 0.040 mm. You are asked to reduce its average grain diameter to 0.010 mm. Is this possible? If so, explain the procedures you...

An undeformed specimen of some alloy has an average grain diameter of 0.050 mm. You are asked to reduce its average grain diameter to 0.020 mm. Is this possible? If so, explain the procedures you...

The lower yield point for an iron that has an average grain diameter of 1 10-2 mm is 230 MPa (33,000 psi). At a grain diameter of 6 10-3 mm, the yield point increases to 275 MPa (40,000 psi). At...

The lower yield point for an iron that has an average grain diameter of 5 10 -2 mm is 135MPa (19,500psi). At a grain diameter of 8 10 -3 mm, the yield point increases to 260MPa (37,500psi). At what...

7.24 The lower yield point for an iron that has an average grain diameter of 5 102 mm is 135 MPa (19,500 psi). At a grain diameter of 8 10-3 mm, the yield point increases to 260 MPa (37,500 psi). At...

planes -. The lower yield point for an iron that has an average grain diameter of 5 x 10 mm is 135 MP. At a grain diameter of 8 x 10 mm, the yield point increases to 260 MPa. At what grain diameter...

3. The yield point for an iron that has an average grain diameter of 1 10-2 mm is 110 MPa. At a grain diameter of 8 10-3 mm, the yield point increases to 430 MPa. At what grain diameter will the...

CW The lower yield point for an iron that has an average grain diameter of 6 X 10-2 mm is 135 MPa. At a grain diameter of 8 x 10-3 mm, the yield point increases to 260 MPa. At what grain diameter...

lower yield point for an iron that has an average grain diameter of 6 * 1 0 ^ - 2 mm is 1 3 5 MPa . At a grain diameter of 8 * 1 0 ^ - 3 * mm the yield point increases to 2 6 0 MPa . At what grain...

17. [-/3 Points) DETAILS SERPSE10 13.6.OP.022. A 999-kg sateliite orbits the Earth at a constant altitude of 101-km. (a) How much energy must be added to the system to move the satellite into a...

Effective marketing strategies rarely feature: O Goals that purposefully raise expectations. O Audaciousness. O Plausible tactics. OA balance between reasonable risk and returns. O Low expectations.

Martin Enterprises April Inventories: April 1 30 Raw material $20,000 $17,000 Work in process 12,000 8,000 Finished goods 30,000 39,000 Additional information for April: Raw material purchased...

[26] Show that there are strings x, y, z such that C(x|y) + C(x|z) > C(x) + C(x|y, z) + O(1). For convenience prove this first for strings of the same length n; but it also holds for some strings x,...

Consider the brass alloy for which the stress-strain behavior is shown in Figure 6.12. A cylindrical specimen of this material 10.0 mm (0.39 in.) in diameter and 101.6 mm (4.0 in.) long is pulled in...

A cylindrical rod 120 mm long and having a diameter of 15.0 mm is to be deformed using a tensile load of 35,000 N. It must not experience either plastic deformation or a diameter reduction of more...

A cylindrical rod 500 mm (20.0 in.) long and having a diameter of 12.7 mm (0.50 in.) is to be subjected to a tensile load. If the rod is to experience neither plastic deformation nor an elongation of...

1. The common stock of Fine China sells for $38.42 a share. The stock is expected to pay an annual dividend of $1.80 next year and increase that amount by 4 percent annually thereafter. What is the...

Imaginez un sc nario dans lequel votre entreprise value sa structure de capital pour optimiser sa valeur. Actuellement, l'entreprise est financ e par une combinaison de dettes et de capitaux propres....

Indiana Co . expects to receive 4 million euros in one year from exports, and it wants to consider hedging its exchange rate risk. The spot rate of the euro as of today is $ 1 . 0 7 . Interest rate...