Question: Two flows of equal mass flow rate, one at state-1 and another at state- 2 enter an adiabatic mixing chamber and leave through a single

Two flows of equal mass flow rate, one at state-1 and another at state- 2 enter an adiabatic mixing chamber and leave through a single port at state-3. Obtain an expression for the velocity and specific enthalpy at the exit. Assume negligible changes in ke and pe.

Step by Step Solution

★★★★★

3.44 Rating (173 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

At steady state a Where ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

861-ME-T (6876).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

A mixture containing 35.0 mole% n-butane and the balance isobutene at 10C enters a he3t exchanger at a rate of 24.5k mol/h and a pressure high enough for the mixture to be a liquid. The exchanger has...

Two flows are mixed to form a single flow. Flow at state 1 is 1.5 kg/s water at 400 kPa, 200oC and flow at state 2 is 500 kPa, 100oC. Which mass flow rate at state 2 will produce an exit T3 = 150oC...

Two flows of air both at 200 kPa of equal flow rates mix in an insulated mixing chamber. One flow is at 1500 K and the other is at 300 K. Find the irreversibility in the process per kilogram of air...

5-43C Consider an adiabatic turbine operating steadily. Does the work output of the turbine have to be equal to the decrease in the energy of the steam flowing through it? 5-44C Consider an air...

Republic of Iraq Ministry of Higher Education and Scientific Research University of Technology Chemical Engineering Department MODELING AND SIMULATION OF FCC RISERS A RESEARCH SUBMITTED TO THE...

a. Example 13-1: Batch Reactor with an Exothermic Reaction Wolfram 1. Adiabatic Case: Use Wolfram to see whether you can find a trajectory that is ready to ignite and whose trajectory looks like a...

5-180 Determine the power input for a compressor that compresses helium from 150 kPa and 20C to 400 kPa and 200C. Helium enters this compressor through a 0.1-m2 pipe at a velocity of 15 m/s. 5-181...

ATTEMPT ALL QUESTIONS. BE SURE TO ANSWER A body with mass m = 1 2 kg is attached to the end of a spring that is stretched 2 m by a force of 100 N. Furthermore, there is also attached a dashpot4 that...

Question 1 A steam power cycle with regeneration as shown below on the T-s diagram employs a single open feedwater heater for efficiency improvement. The fluids mix with each other in an open...

A mixing chamber has two inlets and one outlet. At one inlet, air enters the chamber at 200 kPa and 400 K with a mass flow rate of 1 kg/s. At the other inlet, air enters the chamber at 290 K with a...

In the current period Forward Co. It started production of 21,000 units and completed 8,400 units, of which 42% of the ongoing 12,600 units were completed. Suppose there is no startup job in...

2-15. A spherical charge distribution has a volume charge density which is a function only of r, the distance from the center of the distribution. In other p(r). If p(r) is as given below, determine...

What will be displayed after the following code executes? { ' GA ' : 'Atlanta', ' NY ' :'Albany', ' CA ' : 'San Diego' } KeyError { ' GA ' : 'Atlanta', ' NY ' :'Albany', ' CA ' :'San Diego', ' FL ' :...

Suppose you are offered a job that lasts one month. Which of the following methods of payment do you prefer? I. One million dollars at the end of the month. II. One cent on the first day of the...

Steam enters a diffuser at 20 psia and 240F with a velocity of 900 ft/s and exits as saturated vapor at 240F and 100 ft/s. The exit area of the diffuser is 1 ft2. Determine (a) The mass flow rate of...

Steam enters an adiabatic nozzle at 2 MPa and 350C with a velocity of 55 m/s and exits at 0.8 MPa and 390 m/s. If the nozzle has an inlet area of 7.5 cm2, determine (a) The exit temperature and (b)...

Steam expands in a turbine steadily at a rate of 40,000 kg/h, entering at 8 MPa and 500°C and leaving at 40 kPa as saturated vapor. If the power generated by the turbine is 8.2 MW, determine the...

2. Exhibit 9.14 presents the income statement and balance sheet for PartsCo, a $900 million supplier of machinery parts. Next year, the company is expected to grow revenues by 15 percent to $1,035...

The change between a firm's beginning cash balance and ending cash balance would equal a total assets minus total liabilities minus total stockholders' equity. b net income plus new borrowing minus...

A put option with a strike of $ 7 3 and 8 month maturity on an underlying share priced at $ 6 0 is currently available at $ 1 6 . What would be the value of a synthetic call option for the same...