Question: Repeat Problem 2-124 for aluminum fins installed on a copper tube. Problem 2-124 A tube assembly is constructed of copper with an inside diameter of

Repeat Problem 2-124 for aluminum fins installed on a copper tube.
Problem 2-124
A tube assembly is constructed of copper with an inside diameter of 1.25 cm, wall thickness of 0.8 mm, and circumferential fins around the periphery. The fins have a thickness of 0.3 mm and length of 3 mm, and are spaced 6 mm apart. If the convection heat transfer coefficient from the tube and fins to the surrounding air is 50 W/m2 · ºC, calculate the thermal resistance for a 30-cm length of the tube-fin combination. What is the fin efficiency for this arrangement? If the inside tube temperature is 100ºC and the surrounding air temperature is 20ºC, what is the heat loss per meter of tube length? What fraction of the loss is by the fins?

Step by Step Solution

★★★★★

3.44 Rating (157 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

n f 096 For 6mm lenth Rt... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

892-P-T-H-T (654).docx

120 KBs Word File

Students Have Also Explored These Related Thermodynamics Questions!

Repeat Problem 2-125 for aluminum fins installed on a copper tube. Problem 2-125 Calculate the R value for the fin-tube combination in Problem 2-116. Problem 2-116 An aluminum fin is attached to a...

Repeat Problem 74 for hie. (Same changes in IC). a. Using Fig. 5.124, determine the magnitude of the percentage change in hfe, for an IC change from 0.2 mA to 1 mA using the equation b. Repeat part...

Repeat Problem 17.45 for the case of an aluminum pipeand-fin arrangement. Data From Problem 17.45 A 2-in.-OD stainless steel tube has 16 longitudinal fins spaced around its outside surface as shown....

Circumferential fins of rectangular profile are constructed of aluminum and attached to a copper tube having a diameter of 25 mm and maintained at 100C. The length of the fins is 2 cm and thickness...

Heat transfer Multiple pin fins with circular cross sectional Problem # 1: Multiple pin fins with circular cross sectional area Statement of the problem: A furnace wall of size 1 m by 1 m at 100C is...

A tube assembly is constructed of copper with an inside diameter of 1.25 cm, wall thickness of 0.8 mm, and circumferential fins around the periphery. The fins have a thickness of 0.3 mm and length of...

A tube assembly is constructed of copper k= 386 W/mC with an inside diameter of 1.25 cm , wall thickness of 0.8 mm, and circumferential fins around the periphery. The fins have a thickness of 0.3 mm,...

EXERCISE 8 Compute the required diameter of a circular bar to be used as a column carrying a load of 8 5 0 0 lb withpinned ends. The length is 5 0 in . Use SAE 4 1 4 0 OQT 1 0 0 0 steel and a design...

Need help filling these out and the questions with it... thanks Here's some information sig nys.) for each length submerged (including fully submerged). (In the data table click increase precision....

The M are Figure 1 I 3. Familiarize yourself with the toolbar on the left side using the provided handout located on the canvas course page. 4. Spend time examining the main screen of the calorimeter...

When is using the cost method the appropriate accounting for equity investments?

Compute for the total of Property, Plant and Equipment given that: Total Asset is 354,628 and that intangibles amount to 11,073. (Use 2018 data). Assets Current assets Exxon Mobil Corporation...

Which one of the following is a leverage measure? net working capital net prowit murfin times interest earned retum on equity

During the process of selecting the sellers, the project manager rejects one vendor because it doesnt have the necessary manufacturing capability. This is an example of which selection tool? A....

It is proposed to preheat the water for a boiler with flue gases from the boiler stack. The flue gases are available at 150?C, at the rate of 0.25 kg/s and specific heat of 1000 J/(kg K). The water...

Water is to be heater from 10 to 30?C, at the rate of 300 kg/s by atmospheric pressure steam in a single-pass shell-and-tube heat exchanger consisting of 1-in schedule 40 steel pipe. The surface...

Water flowing at a rate of 12.6 kg/s is to be cooled from 90 to 65?C by means of an equal flow rate of cold water entering at 40?C. The water velocity with the such that the overall coefficient of...

ANSWER AND SHOW WORK! 1. Suppose the dollar-pound exchange rate in the spot market is $1.4941, while the dollar-euro exchange rate is $0.9157. Calculate the cross rate for the euro-pound exchange...

7. Suppose you would like to invest $5000 into a mutual fund for three years. The following 3 mutual fund all have an expected annual return of 12% but with different fee structures. Which mutual...

3 Part Question Jakes Car-Buying Decisions Jake, who lives in St. Louis, is trying to decide between the following car models: Brand and Model Cost Hyundai Accent $14,195 Mini Cooper 23,450 Jeep...