(a)What is the command to display the R1 routing table?

[1 mark]

(b) There are three types of routes in a router's routing table. Based on Figure 6 and Table 1, name the THREE (3) types and their route.

[3 marks]

(c) Which path (route) and the next hop will R1 router choose to forward the packet to the host destination?
 

Figure 6 shows a communication between PC1 as a host source and PC2 as a host destination At 10.1.2.10/24. PC1 10 192.168.10.0/24 209.165.200.224/30 Route 192.168.10.0/24 209.165.200.224/30 10.1.1.0/24 0.0.0.0/0 1225 GO/O/0 R1 GO/0/1 Figure 6 226 Intenet 10.1.2.0/24 Next Hop or Exit Interface G0/0/0 G0/0/1 Via R2 Via R2 10 Router uses its IP routing table to determine the best path (route) to forward a packet. Given the information of R1 Routing table as in Table 1; Table 1 PC2 Figure 6 shows a communication between PC1 as a host source and PC2 as a host destination At 10.1.2.10/24. PC1 10 192.168.10.0/24 209.165.200.224/30 Route 192.168.10.0/24 209.165.200.224/30 10.1.1.0/24 0.0.0.0/0 1225 GO/O/0 R1 GO/0/1 Figure 6 226 Intenet 10.1.2.0/24 Next Hop or Exit Interface G0/0/0 G0/0/1 Via R2 Via R2 10 Router uses its IP routing table to determine the best path (route) to forward a packet. Given the information of R1 Routing table as in Table 1; Table 1 PC2