b) Consider the following C programs in Table Q5b. Write the first 3 output sequences generated by Arduino code 1 and Arduino Code 2. Arduino Code 1 /* Global variable definition char stone; char problem = 'blind' ; char person = 'blind'; void setup () { Serial.begin(9600); Serial.println("Welcome to the well-being assistant program"); } void loop () { if(person == problem){ stone = problem; } Table Q5b: Arduino C programs Arduino Code 2 if((person != problem) && (problem==stone)) { delay(1000); Serial.println("Help Not Needed"); } } else if((person == problem) && (problem==stone)) { delay(1000); Serial.println("Help Needed"); } int i; float temp = 25.0; void setup (void) { Serial.begin(9600); Serial.println("Welcome to the weather station."); } void loop(void) { if(temp >=20.0 && temp < 30.0) { for(i temp;i>23; i--) { windy"); temp = temp+3; delay(1000); Serial.println("The weather is cool and delay(1000); } } else { (8 marks) delay(1000); Serial.print("The temperature is: "); Serial.println(temp); Serial.println("The weather is getting hot & humid"); delay(1000); }