Create a C programme for lathe machine using the parameter and the design as Shown. Program ANALYSIS MUST CONSIST: total part machining time, total energy consumption, total operation cost, by-products or solid waste generation in kg, and estimated productivity per 8 hours working. Your program MUST shows the DETAILS STEPS and PARAMETERS & CORRECT CALCULATION to machine raw material until you get the end product (part design). Your program Must have:1.The conventional machines specifications and limitations (e.g. size of allowed material dimensions) 2. Details steps/guidelines to machine until you get a part design (e.g. facing reducing diameter threading). 3. Each program must consist AT LEAST 5 operational steps to complete a part machining. 4. Each program MUST consists at least 2"function", 2"for looping, Decision Operators and Array. 5. Each program MUST shows the analysis results: part machining time, total energy consumption, total operation cost, by-products or solid waste generation, and estimated productivity per day.

-1/2 BSP 2-00 102.co - P20x1.5 -0 29.00 ITEM SPECIFICATION Chuck size 101.6mm Bar Capacity 25.4mm Max Rpm 8000 RPM X-axis travel 220mm Y-axis travel 220mm Rapid traverse X-axis 15m/min Rapid traverse Y-axis 15m/min Main Spindle Motor 2.2/3.7 Kw Motor specifications Wired @ 220 Volt Turning tool size 16mm Boring Bar diameter 20mm Controller Fanuc-S-211-TB -1/2 BSP 2-00 102.co - P20x1.5 -0 29.00 ITEM SPECIFICATION Chuck size 101.6mm Bar Capacity 25.4mm Max Rpm 8000 RPM X-axis travel 220mm Y-axis travel 220mm Rapid traverse X-axis 15m/min Rapid traverse Y-axis 15m/min Main Spindle Motor 2.2/3.7 Kw Motor specifications Wired @ 220 Volt Turning tool size 16mm Boring Bar diameter 20mm Controller Fanuc-S-211-TB