Create the below topology same as given in the below output. Server configuration a. Use the IP address 7.7.7.7 and username and password as exam b. Remotely connect the necessary devices. c. Conditions for remote devices: 1. If the humiature is greater than 50 the Humidifier must be ON. 2. If the humiature is less than 50 the Humidifier must be OFF d. Use MCU and connect the necessary devices 1. If the motion sensor value ON and the Humidifier is ON, then the RGB LED must be in RED color and Light should be ON. 2. Else only if the humidifier is ON the Blue color LED should be ON and Light must be OFF. 3. Else if the humidifier is OFF the Green color LED must be ON and LIGHT must be OFF