I need all steps to create this in packet tracer and how to create LANs and VLAN

You need to do the followed:

$1.$ Chose the IP$$s for the routers and use subnet $30,$ and write why we used that?

$($write the IP addresses next to the interface$).$

$-$ Use IP address X$\mathrm{.}0\mathrm{.}0\mathrm{.}0/30$ for example and change the X to be your last $2$ digit

on your student ID$.$

$2.$ Area number should mach of X except the one in area $0.$ EX if IP is $10\mathrm{.}10\mathrm{.}0\mathrm{.}0$

area should be area $10.$For LANs use $192\mathrm{.}168.$X$\mathrm{.}0$ change X to be the same as

your area ID$.$ on area $2,$ the second VLAN X will be $($area ID $+4).$

$3.$ For the LAN$$s:

$1.$ LAN in area $3$ should have around $8000$ users.$($ chose the closest number to

$8000$ users but not less than $8000$ users$).$

$2.$ Lan in area $4$ should have $500$ users.

$3.$ Area $2$ should contain two VLANs:

$1.$ VLAN $1$ should be class C

$2.$ VLAN $2$ should have $3000$ users.

$4.$ LAN in area $1$ should have around $60000$ users.

$4.$ Each LAN and VLAN should have DHCP service.

$5.$ Use OSPF routing protocol with the areas shown on the figure.$($copy the

commands on your report$)$

$6.$ Use show command to show the next for router $12,$ router $17,$ router $14$: $-$ neighbors

Area $2$

$-$ database $-$ database summary.

$7.$ Chose the area type carefully and write the reason why have chosen it for each

area.

$$ Area $1$ and $4$ has routers with small memory and lesser CPU.

$8.$ Show the cost from router Router $14$ to Router $17$ and show all the paths.

Define which one is shorter. Do Q$\mathrm{.}8$ with the default reference B$/$W and see if

you have to change it$,$ Explain.