please identify all addresses needed in "router r1" , "switch 0" , "pc0" , "pc1" and "server0" , needed asap please , thanks !

Fall 2021-2022 Below you are asked to practice Equal Size Subnetting and then configure the devices RI, Switch 0, PCO, PCI and the Server0. Apply Equal Size subnetting on network 192.168.192.0/23 to create 4 networks. The first network address you get from subnetting will be the Network Address of Subnet 1 and the second network address you get from subnetting will be that of Subnet 2. Relying on the results you got from Part 1 you are asked to configure the below devices as follows: o Router RI o Set the hostname of R1 to be Myrouter, 9 Give interface GO/O the last valid ip address from Subnet 1. Activate the interface. Give interface Go 1 the first valid ip address from Subnet 2. Activate the interface. o Set the privileged mode secret to NoAccess. o Save your configurations o Switch 0 o Set the hostname to mySwitch o Set the console password to Ciscopass Configure interface Vlan 1 with the second valid ip address in Subnet 2 Set the appropriate default gateway address o Set a banner message "Authorized Access Only o Encrypt all configured passwords o Save your configurations Configure PCO with the 3rd valid ip address in Subnet 2, a subnet mask and a default gateway Configure PC1 with the first valid ip address in Subnet 1, subnet mask and default gateway Configure the Servero with the 10th valid ip address in Subnet 2, a subnet mask, and a default gateway Verify all the above devices are able to ping cach other, save your file with your full name and ID and upload to Google Classroom O