Using the specs in Table $1$ below configure Router$0$ & $1,$ Switch$0,$ Switch$1,$ and PCs $0$ to

$3.$ VLANs should be named as given. The frame tagging protocol to be used is

IEEE$802\mathrm{.}1$Q$.$

$$ Configure Static route on Router $0$& $1.$

$$ From PC$0$ ping PC$1,$ PC$2,$ and PC$3.30$ points

$$ Ensure pings are successful. If not, troubleshoot and fix the problem.

$$ Copy $3$ ping commands together with the results to the report on to a separate page

with an appropriate title.

$$ For PCs $0$ to $3$ select the Config tab and the Interface F$0$ and copy a screenshot showing

the MAC and IP address of each PC on to a separate page with appropriate titles.

$$ Copy routing table of Routers $0$ on to a separate page with appropriate title. $10$ points

TABLE $1$ Device Configuration Specification:

Routers Switches PCs

Part $3$: $(40$ points$)$

$$ Using the specs in Table $1$ above configure Switch$2,$ and PCs $4$ and $5.$

$$ From PC$0$ ping PC$4$ and PC$5.20$ points

$$ Ensure pings are successful. If not, troubleshoot and fix the problem.

$$ Copy $2$ ping commands together with the results to the report on to a separate page

with an appropriate title.

$$ Copy VLAN database of switch $2$ on to a separate page with appropriate title.

$$ Provide VLAN Brief of Switches S$1$ and S$2$ on to a separate page with appropriate title. $$