Question: X = 30; H = 10,000; f = 6 in. Aerial photography was taken at a flying height H ft above average terrain. If the

X = 30; H = 10,000; f = 6 in.
Aerial photography was taken at a flying height H ft above average terrain. If the camera focal plane dimensions are 9 X 9 in. the focal length is f and the spacing between adjacent flight lines is X ft, what is the percent sidelap for the data given in the Problem above.

Step by Step Solution

★★★★★

3.40 Rating (163 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

S 6 10000 1 in 1666 67 f... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

707-P-M-K (930).docx

120 KBs Word File

Students Have Also Explored These Related Mechanics Questions!

An air base of 3205 ft exists for a pair of overlapping vertical photographs taken at a flying height of 5500 ft above MSL with a camera having a focal length of 152.4 mm. Photo coordinates of points...

X = 8; H = 4000; f = 152.4 mm Aerial photography is to be taken of a tract of land that is X mi square. Flying height will be H ft above average terrain, and the camera has focal length f. If the...

We remarked in Impact 19.2 that the particle in a sphere is a reasonable starting point for the discussion of the electronic properties of spherical metal Nan particles. Here, we justify eqn 9.54,...

Part A Aerial photography is to be taken of a tract of land that is x - mi square. Flying height will be H f t above average terrain, and the camera has focal length f . If the focal plane opening is...

Aerial photography is to be taken of a tract of land that is X - mi square. Flying height will be H ft above average terrain, and the camera has focal length f . If the focal plane opening is 9 \...

Please review and critique for any errors. provide feedback \fNon-symmetrical vs Nonsymmetrical Symmetrical . In a cambered airfoil ( nonsymmetrical), the mean camber line and Symmetrical chord line...

Please quality check my solutions for this advanced heat transfer problem. Show all work. Thank you. All original documents are located at the bottom. 3.9 COMPACT HEAT EXCHANGERS 3.9.10-1 3.9.10...

Review the slides below and provide any form of feedback negative or positive. critique everything but in a professional manner. Independent Project: Cirrus SR22 Welcome to Engadin Airport boom + ....

UNDERSTAND PRACTICE 10. Error Analysis Kendall was asked to find 16. Trace ABCD and point P. the scale factor for the dilation. What is Draw the dilation of Kendall's error? ABCD using P as the...

Can an expert in advanced heat transfer review my work and verify my solutions. Please show all work where corrections are needed. I have uploaded the original problem materials for reference as...

Question 1 (25 marks) A uniform dead load of 10 kN/m and a single live concentrated force of 20 kN are imposed to the beam shown in Figure 1. For the support conditions, assume that the support at D...

A certain quaternary star system consists of three stars, each of mass m, moving in the same circular orbit of radius r about a central star of mass M. The stars orbit in the same sense, and are...

B Ltd held a general meeting including the following alterations to the articles which were duly passed: (a) a member shall, upon the request of the board, transfer his shares to a person nominated...

Which process involves identifying quality requirements and standards for the project and its deliverables? a) Plan Quality Management b) Control Quality c) Manage Quality d) Plan Risk Management

A 120-lb cabinet is mounted on casters that can be locked to prevent their rotation. The coefficient of static friction between the floor and each caster is 0.30. Assuming that the casters at both A...

Wire is being drawn at a constant rate from a spool by applying a vertical force P to the wire as shown. The spool and the wire wrapped on the spool have a combined weight of 20 lb. Knowing that the...

Determine whether the block shown is in equilibrium and find the magnitude and direction of the friction force when P = 400 N. 500 N .-0.34) = 0.25 20

Suppose the yield on short-term government securities (perceived to be risk-free) is about 7.76%. Suppose also that the expected return required by the market for a portfolio with a beta of 1.0 is...

3) Flexibility consideration: What if the annual inflation factor needs to be considered? Hints: So far in that example on the Power Point, all items such as annual sales or costs are given as real...

You have saved $5,000 for a down payment on a new car. The largest monthly payment you can afford is $350. The loan will have an 8% APR based ond-ofmonth payments. What is the most expensive car you...