Question: A piston-cylinder device initially contains 1.2 kg of air at 700 kPa and 2008C. At this state, the piston is touching on a pair of

A piston-cylinder device initially contains 1.2 kg of air at 700 kPa and 2008C. At this state, the piston is touching on a pair of stops. The mass of the piston is such that 600-kPa pressure is required to move it. A valve at the bottom of the tank is opened, and air is withdrawn from the cylinder. The valve is closed when the volume of the cylinder decreases to 80 percent of the initial volume. If it is estimated that 40 kJ of heat is lost from the cylinder, determine (a) the final temperature of the air in the cylinder, (b) the amount of mass that has escaped from the cylinder, and (c) the work done. Use constant specific heats at the average temperature.

Air 1.2 kg 700 kPa 200 C FIGURE P5-185

Step by Step Solution

★★★★★

3.41 Rating (157 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Air is allowed to leave a pistoncylinder device with a pair of stops Heat is lost from the cylinder The amount of mass that has escaped and the work d... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

837-ME-T (5139).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

An insulated piston-cylinder device initially contains 1.8-kg saturated liquid water at 120oC. Now an electric resistor placed in the tank is turned on for 10 min until the volume quadruples....

A piston - cylinder device initially contains 1.4 kg of refrigerant-134a at 100 kPa and 20C. Heat is now transferred to the refrigerant from a source at 150C, and the piston which is resting on a set...

A piston - cylinder device initially contains 0.4 kg of nitrogen gas at 160 kPa and 140oC. The nitrogen is now expanded isothermally to a pressure of 100 kPa. Determine the boundary work done during...

A pistoncylinder device initially contains 1.2 kg of air at 700 kPa and 200°C. At this state, the piston is touching on a pair of stops. The mass of the piston is such that 600- kPa pressure is...

5-180 Determine the power input for a compressor that compresses helium from 150 kPa and 20C to 400 kPa and 200C. Helium enters this compressor through a 0.1-m2 pipe at a velocity of 15 m/s. 5-181...

ATTEMPT ALL QUESTIONS. BE SURE TO ANSWER A body with mass m = 1 2 kg is attached to the end of a spring that is stretched 2 m by a force of 100 N. Furthermore, there is also attached a dashpot4 that...

A pistoncylinder device initially contains 2 kg of refrigerant-134a at 800 kPa and 80C. At this state, the piston is touching on a pair of stops at the top. The mass of the piston is such that a...

A 0.40-m 3 insulated pistoncylinder device initially contains 1.3 kg of air at 30C. At this state, the piston is free to move. Now air at 500 kPa and 70C is allowed to enter the cylinder from a...

A 0 . 4 0 m 3 0 . 4 0 - m 3 insulated piston - cylinder device initially contains 1 . 3 kg of air at 3 0 C . At this state, the piston is free to move. Now air at 5 0 0 kPa and 7 0 C is allowed to...

Can I please get some help on these very easy question Ill make sure to upvote thank you NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A...

Kent Morgan is the Managing Director of Hot Pies Ltd, a producer of meat pies and sausage rolls. Kent has recently purchased a delivery van to distribute the pies and sausage rolls to bakeries in...

Determine the domain and the range of the function.

6.3 What do you understand by batch method of production? How does it differ from the job shop method?

What is your zip code?

The curved semi-circular frame shown in Figure P5-73 is supported by a pin on the left end and a roller on the right end and is subjected to a load P 51000 lb at its apex. The frame has a radius to...

Sketch the variations of the shape functions Nj and Nm, given by Eqs. (6.2.18), over the surface of the triangular element with nodes i, j, and m. Check that Ni 1Nj 1Nm 51 anywhere on the element.

For the plane strain elements shown in Figure P6-10, the nodal displacements are given as u1 = 0.005 mm............v1 = 0.002 mm............u2 = 0.0 mm v2 = 0.0 mm...............u3 = 0.005...

XYZ Yogurt Company is considering developing a new flavor of yogurt- root beer flavored yogurt. the following are the base case assumptions for this product: Life = 3 years Capital Outlay =...

show work (Chapter 26 - Original Text) Use the following information to answer questions 16 to 12. You are a consultant for Paschke Consulting Services. Your client, the CEO of Kroger Co., has...

*Show cell functions for yellow highlights please* O C D E F G H I 7 Rework Problem 5-19. Conroy Consulting Corporation (CCC) has been growing at a rate of 30% per 8 lyear in recent years. This same...