Reler ta Table S5.1 - Factors for Computing Control Chart Limits (3 sigma) for this problem. Twelve samples, each containing live parts, were taken from a process that produces steel rods at Emmanual Kodzis factory. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The results : were: Sample Mean Range (in.) Sample Sample 7 1 2 Sample Mean Range (in.) 10.800 10.804 0.051 10.793 0.042 10.808 0.037 10.799 0.049 10.797 0.053 (in.) 10.803 10.807 10.797 10.801 10.801 10.806 9 10 11 12 0.021 0.055 0.039 0.038 0.054 0.061 4 5 6 For the given data, the x = inches fround your response to four decimal plaoss). Based on the sampling done, the controllimits for 3-agme x chart are: Upper Control Lirit (UCL;) - inches (round your response la four decinal places). Lower Control Limit (LCL) - inches (round your response to four decimal places). Based on the x-chart, is one or more samples beyond the control limits? For the given data, the = inches (round your response to four decimal places). The control limits for the 3-signia R chart are: Upper Control Liit (UCLA) - inches fround your response to four decimal places). Lawer Control Limit (LCLRI- inches (round your response to four decimal places). Based on the R-chart, is one or more samples beyond the control limits